Windows 10 users have reported that a brand new Unknown USB Device error that has begun to appear suddenly. The Unknown USB Device error says Device Descriptor Failure or Device Descriptor Request Failed, along with also a USB device is no longer accepted by the Windows. This may also occur with an SD Card, and the computer doesn’t longer read the SD card if it’s inserted into the card slot.
If your USD device has suddenly stopped functioning, or whether you’re getting this error, there’s not anything to fret anymore. We’ll help you fix this problem and Error using our methods. Just follow and carry out the methods one by one, before the issue is repaired.
How to Repair Error USB Device Descriptor Failure
The Error can occur because of various factors. Thus, you might need to try out quite a few methods, until it has repaired. Perform these methods to fix the problem. Prior to going to try out the methods, only Note that in the event that you are using a USB hub, or possess blended 2.0 and 3.0 USB interfaces, simply try plugging your USB device into the 3.0 interface and see whether it works.There is a good thing about this that you can Resolve The Unknown USB Device Error.It will take just few minutes to resolve this error.Solution for all other errors are also avail on Tech Solitic
Troubleshoot the Error
From the First method, we’ll attempt to repair the issue using Windows Troubleshoot. Windows Troubleshoot is Windows’ inbuilt tool which searches for issues and fixes. Many users have repaired the Error using this method. Follow the steps to repair the problem.
Step 1. Open Troubleshoot. To Open Troubleshoot, Visit Cortana and kind Troubleshoot. Select Troubleshoot out of outcomes.
Step 2. The final step will open a Troubleshoot window. Here, click Gear and Devices.
Step 3. Currently, the Windows will check for issues. After the procedure is completed, Click on Employ this Repair or Employ Repair Automatically, whichever looks.
Step 4. After applying the fix, you merely have to restart your computer.
This Should repair the problem. If you’re still confronting the problem, follow another method.
Reinstall Unknown USB Device Driver
This method, we’ll uninstall the drivers of this Unknown USB Device (Device Descriptor faking ). Faulty drivers may cause this Error too. This might have occurred as Windows automatically upgrades the drivers via Windows upgrade, and it might have set up incorrect or corrupt drivers. Thus, within this method, we’ll uninstall the Unknown USB Device (Device Descriptor Failure) drivers in the order it may roll back into default drivers. Follow the steps to carry out this method.
Step 1. Open Device Manager. To open Device Manager, right-click on the Start menu button and choose Device Manager.
Step 2. Today, look for Unknown USB Device (Device Descriptor Failure). It’s located beneath Universal Serial Bus Controllers. Expand it and right-click on Unknown USB Device (Device Descriptor Failure) — Click Uninstall device.
Step 3. Currently, unplug the USB device in the computer, if it was not Already unplugged, and plug it back into the USB slot.
Step 4. Scan for hardware changes. About the Device Manager window, click on Scan for hardware changes.
Windows will reinstall the Unknown USB Device (Device Descriptor faking ) drivers. This should correct the issue. In case the problem is not resolved, attempt another method.
Update USB Device’s Drivers
This method, we’ll attempt to repair the issue by upgrading the drivers. This could correct the problem as rolling back them did not assist you at the previous method, therefore most likely the drivers are obsolete in your own computer. Follow the steps to carry out this method.
Step 1. Right-click on the Start menu and choose Device Manager.
Step 2. Today, look for Unknown USB Device (Device Descriptor Failure). It’s located beneath Universal Serial Bus Controllers. Expand it and right-click on Unknown USB Device (Device Descriptor Failure). Click Update Driver.
Step 3. Click On Search mechanically for updated driver program.
Now The Windows will install and download the most recent drivers for the distressed USB device. After the procedure is finished, restart your computer, and you’ll be free of this Error.
If This method did not work for you personally and you’re stuck with the Error, try out the next method.